Hydraulic Heating Water Stainless Steel Manifold With Ball Valve Flowmeter 2 To 12 Circuits For Connect Various Heating Pipes

The heating water distributor consists of two parts: water distribution and water collection. The water separator is to separate the hot water from the heat source into the pipes laid by the ground radiant heating of each road, so as to achieve the purpose of room heating and temperature adjustment. The water collector is the function of collecting the low-temperature water in each channel after heat dissipation separately and fixing it to the wall or the ground.
Both the water distributor and the water collector are composed of the main pipe, the shunt adjustment valve and joint, the exhaust valve, the drain valve, the main pipe terminal plug and other components.

What do manifolds do?
1. Adjust the temperature
The heating water divider is used for diversion. If the fully boiled water flow is large and the circulation is fast, the indoor temperature will be high; if the valve of each channel is half-open, or a single half-open, the amount of hot water in the pipeline will be reduced, and the water circulation will be slower. , the corresponding indoor temperature will be low; if the hot water is completely turned off, it will not circulate, which means that there is no heating in the room, so the indoor temperature can be adjusted by using the heating water separator.

2. Room heating
When the heating system is designed and installed for large units, the water outlet pipe and the water return pipe will be installed in different areas. Each water pipe corresponds to a water distributor. When there is no one in an area for a long time, the user can choose to turn off the water distributor. The purpose of sub-room heating.

3. Shunt voltage regulation
The water divider can divide the water in the water pipe, so that the water pipe can achieve the effect of pressure balance.