High-quality 5 Ports Stainless Steel Under Floor Heating Radiant Manifold Pex Manifold Water Separator With Flow Meters

The water distributor is a water distribution and water collection device in the water system, which is used to connect the supply and return water of various heating pipes. According to the incoming and outgoing water, it is divided into a water separator and a water collector. Therefore, it is called a sub-water collector or a water collector, commonly known as a water separator. The material of the water distributor used in the floor heating and air conditioning system should be brass, and the water distributor used for the renovation of the household meter of the tap water supply system is mostly made of PP or PE. The supply and return water are equipped with exhaust valves, and many water distributors are also equipped with drain valves for the supply and return water. The front end of the water supply should be equipped with a "Y" type filter. Each branch of the water supply and water distribution pipe shall be equipped with valves to adjust the amount of water. According to the water in and out.
The working principle of the water separator:
In the floor heating system, the water separator is mainly responsible for the opening and closing of the water flow in the floor heating loop. When the water in the gas boiler flows into the sub-water collector through the main pipeline, the impurities are isolated by the filter, and then the water is evenly distributed into the loop. , after heat exchange, it returns to the water collection and returns to the main bar, and then flows into the heating system from the return port.

The  Manifolds acts as a diverter
1. When there are many pipelines, if too many fittings such as tee and cross are used, the energy loss of the system will be very large.
2. It is convenient for users to operate. When the water separator is used, the pipeline direction is clear and clear, and it is easy to operate.
3. It is convenient for maintenance. The interfaces on the water separator are all flanged connections. It can be said that the purpose is to facilitate disassembly and maintenance.
4. Reduce the system pressure difference.