China wholesale Brass Ferrule Fitting Suppliers - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng

Short Description:

Product Detail

Product Tags

Feedback (2)

We offer fantastic strength in high quality and enhancement,merchandising,income and marketing and procedure for Brass Drop Ear 90, Brass Compression Sleeve, Ball Valves, We're searching ahead to setting up long-term company associations with you. Your comments and solutions are remarkably appreciated.

China wholesale Brass Ferrule Fitting Suppliers - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng Detail:

Optional Specification

Female tee brass compression fitting for Al-pex Pipe

Product Information

Product name	Male Straight Brass Al-Pex Fittings
Sizes	16×1/2″, 18×1/2″, 20×1/2″, 20×3/4″, 26×3/4”,26×1″,32×1”
Bore	Standard bore
Application	Water, oil, gas, and other non-corrosive liquid
Working pressure	PN16 / 200Psi
Working temperature	-20 to 120°C
Working durability	10,000 cycles
Quality standard	ISO9001
End Connection	BSP, NPT
Features:	Forged brass body
	Precise dimensions
	Various sizes available
	OEM production acceptable
Materials	Spare Part	Material
	Body	Forged brass, sandblasted and nickel-plated
	Nut	Forged brass, sandblasted and nickel-plated
	Insert	Brass
	Seat	Open copper ring
	Seal	O-ring
	Stem	N/A
	Screw	N/A
Packing	Inner boxes in cartons, loaded in pallets
	Customized design acceptable

Key Words

Brass Fittings, Brass Pex Fittings, Water Pipe Fittings, Tube Fittings, Brass Pipe Fittings, Plumbing Fittings, Pex Plumbing Fittings, Pex Pipe And Fittings, Pex Expansion Fittings, Pex Elbow, Pex Coupling, Pex Compression Fittings, Pex Al Pex Fittings, Pex A Fittings, Copper To Pex Fittings

Optional Materials

Brass CW617N, CW614N, HPb57-3, H59-1, C37700, DZR, Lead-free

Applications

Fluid control system for building and plumbing: Water,oil, Gas, and other non-corrosive liquid
The working principle of the brass compression fitting is to insert the steel pipe into the ferrule, lock it with the ferrule nut, interfere with the ferrule, cut into the pipe and seal. Brass compression fitting do not need to be welded when connecting with steel pipes, which is conducive to fire and explosion-proof and high-altitude operations, and can eliminate the drawbacks caused by inadvertent welding. Therefore, it is a relatively advanced connector in the pipelines of automatic control devices of oil refining, chemical, petroleum, natural gas, food, pharmaceutical, instrumentation and other systems. Suitable for oil, gas, water and other pipeline connections.
1. All brass compression fittings can be reassembled multiple times, but make sure the parts are undamaged and clean.
2. Insert the tube into the joint body until the pressure is against the conical surface of the joint body, and tighten the nut by hand.
3. Tighten the nut with a wrench until the tightening torque increases sharply, and then tighten it by 1/4 to 1/2
Just circle.
The tube can be removed to check the fit: there should be an even slight bump on the tube at the end of the ferrule. The clamp cannot slide back and forth, but a slight rotation is allowed.
The reasons for leakage after compression installation are as follows:
1. The tube is not inserted all the way.
2. The pressed nut is not tightened.
3. The surface of the tube is scratched or the tube is not round.
4. The tube is too hard.

Contact Us

Product detail pictures:

Related Product Guide:

Adhering into the principle of quality, provider, performance and growth, we now have gained trusts and praises from domestic and intercontinental consumer for China wholesale Brass Ferrule Fitting Suppliers - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng , The product will supply to all over the world, such as: Casablanca, Iran, Moldova, Only for accomplishing the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers, because you win, we win!

1 Copper Compression Coupling