China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Compression Fitting To Copper Pipe, Copper To Pex Connection, Connecting Pex To Copper Water Line, We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.
China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng Detail:

Optional Specification

Female tee brass compression fitting for Al-pex Pipe

Product Information

Product name Male Straight Brass Al-Pex Fittings
Sizes 16×1/2″, 18×1/2″,  20×1/2″, 20×3/4″, 26×3/4”,26×1″,32×1”
Bore Standard bore
Application Water, oil, gas, and other non-corrosive liquid
Working pressure PN16 / 200Psi
Working temperature -20 to 120°C
Working durability 10,000 cycles
Quality standard ISO9001
End Connection BSP, NPT
Features: Forged brass body
Precise dimensions
Various sizes available
OEM production acceptable
Materials Spare Part Material
Body Forged brass, sandblasted and nickel-plated
Nut Forged brass, sandblasted and nickel-plated
Insert Brass
Seat Open copper ring
Seal O-ring
Stem N/A
Screw N/A
Packing Inner boxes in cartons, loaded in pallets
Customized design acceptable

Key Words

Brass Fittings, Brass Pex Fittings, Water Pipe Fittings, Tube Fittings, Brass Pipe Fittings, Plumbing Fittings, Pex Plumbing Fittings, Pex Pipe And Fittings, Pex Expansion Fittings, Pex Elbow, Pex Coupling, Pex Compression Fittings, Pex Al Pex Fittings, Pex A Fittings, Copper To Pex Fittings

Optional Materials

Brass CW617N, CW614N, HPb57-3, H59-1, C37700, DZR, Lead-free

Applications

Fluid control system for building and plumbing: Water,oil, Gas, and other non-corrosive liquid
The working principle of the brass compression fitting  is to insert the steel pipe into the ferrule, lock it with the ferrule nut, interfere with the ferrule, cut into the pipe and seal. Brass compression fitting do not need to be welded when connecting with steel pipes, which is conducive to fire and explosion-proof and high-altitude operations, and can eliminate the drawbacks caused by inadvertent welding. Therefore, it is a relatively advanced connector in the pipelines of automatic control devices of oil refining, chemical, petroleum, natural gas, food, pharmaceutical, instrumentation and other systems. Suitable for oil, gas, water and other pipeline connections.
1. All brass compression fittings can be reassembled multiple times, but make sure the parts are undamaged and clean.
2. Insert the tube into the joint body until the pressure is against the conical surface of the joint body, and tighten the nut by hand.
3. Tighten the nut with a wrench until the tightening torque increases sharply, and then tighten it by 1/4 to 1/2
Just circle.
The tube can be removed to check the fit: there should be an even slight bump on the tube at the end of the ferrule. The clamp cannot slide back and forth, but a slight rotation is allowed.
The reasons for leakage after compression installation are as follows:
1. The tube is not inserted all the way.
2. The pressed nut is not tightened.
3. The surface of the tube is scratched or the tube is not round.
4. The tube is too hard.

Contact Us

contact


Product detail pictures:

China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng detail pictures

China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng detail pictures

China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng detail pictures

China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng detail pictures

China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng detail pictures


Related Product Guide:

We usually believe that one's character decides products' high quality, the details decides products' excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for China wholesale 15mm Elbow Compression Factories - Equal Tee Brass Compression Fitting For Al-pex Pipe – Peifeng , The product will supply to all over the world, such as: Plymouth, French, Latvia, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
  • Problems can be quickly and effectively resolved, it is worth to be trust and working together.
    5 Stars By Constance from Juventus - 2017.11.29 11:09
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Bernice from Stuttgart - 2018.06.28 19:27